Gree's Twin-Screw Compressor Housing Patent: Detachable Inner Cylinder Reduces Iteration Costs

November 18, 2026

Gree's Twin-Screw Compressor Housing Patent: Detachable Inner Cylinder Reduces Iteration Costs

Gree Electric has obtained a new utility model patent for a "Twin-Screw Compressor Housing and Twin-Screw Compressor," with the authorization date being November 13. The patent designs the housing as a split structure consisting of an outer cylinder and a detachable inner cylinder. The inner cylinder carries the rotor cavity and the axial and radial suction ports, and can be flexibly adjusted for different positions and shapes of suction and discharge ports without modifying the outer cylinder.

Twin-screw compressor housings are traditionally integrally cast or machined, with one housing corresponding to one set of molds and one production line. When a product needs to be adapted to different refrigerants, different operating conditions, or different discharge directions, reconfiguration often means re-making molds and re-commissioning production lines, resulting in considerable development cycles and costs. Gree's patent splits the housing into two layers: an outer cylinder and an inner cylinder. The outer cylinder remains unchanged as the pressure-bearing and structural main body, while the inner cylinder carries the rotor cavity and port layout. During reconfiguration, only the inner cylinder module needs to be replaced. The patent abstract states that this "can significantly reduce R&D and manufacturing costs and improve product iteration efficiency."

The engineering value of this structure lies in the flexibility of product series development. For twin-screw compressors under different refrigerant routes and application conditions, the positions and shapes of suction and discharge ports need to be adjusted accordingly. The split-type inner cylinder narrows the scope of change from the entire machine to a replaceable module, allowing the same outer cylinder platform to spawn multiple models. For product series development involving multiple operating conditions and multiple refrigerants, this modular approach shortens the path from design to mass production rather than improving the performance of a single machine. How quickly this structure is actually applied on Gree's twin-screw product lines will be a window for observing the extent to which its engineering value is realized.